Yeast

Id
169  
Name
Fqctenl  
Attenuation
75  
Manufacturer
 
Desc
First, shake this stuff really well boerfe you use it and after every few seconds of use, otherwise you'll end up w/ less solids in the fluid when it is almost empty (still works but is thinner and runs easily). I've used this to repair a few circuits. First one was my multitester ammeter stopped working, opened it up and could see where some solder had flaked off the board where a connection was made with that instead of a trace in the board. I've primarily used this as a solder substitute for assembling battery packs and making repairs where soldering was difficult or impossible. The product is almost like a conductive glue it sets up pretty hard and with mild adhesion. If several coats are applied it does have decent strength, at least enough to handle the connection gently. Be sure to allow it to dry completely between coats and boerfe testing or reinforcing the connection (its hardly conductive boerfe drying, which is good if you screw up). Once it is set up I put a thin coat of jb weld over it to physically secure the connection. This has allowed me to repair several devices that would otherwise have been junk, for example, a pet collar that could not be disassembled and had a broken power connection to the board. It is awesome for battery packs. I can wire them together instead of using AA battery holders, which are bulkier, restrict you to the shapes available and have a higher resistance. I just finished assembling nearly 200 nicad AAs and used less than two pens. Radioshack has this same product for $10. I use it too fast for it to dry up on me. There is a thinner/cleaner available and the same stuff can be bought in little jars. Wipe the tip boerfe storing, store it with the tip pointed up and it won't get plugged. If it does, the body screws off and you can clean the tip with solvent. One reviewer said the pen has a ball and dispenses too much fluid. It is not a ball, it is a little spring loaded plug. I find the dispenser quite convenient but if you need to make VERY accurate traces you might want to put some on something else, like a coin, and then paint' it on by dabbing the pen in that little puddle and applying it to your board w/o pressing down hard enough to move the plug (or just use a toothpick, pin, etc.).  
Proper Name
Fqctenl  
FB.init({ appId : '435081376536904', // App ID /* channelURL : '../../Vendor/channel.php', // Channel File */ status : true, // check login status cookie : true, // enable cookies to allow the server to access the session oauth : true, // enable OAuth 2.0 xfbml : true // parse XFBML }); window.fbAsyncInit = function() { /************** //alert('Aysnch loading complete'); // Checks whether the user is logged in FB.getLoginStatus(function(response) { if (response.authResponse) { // logged in and connected user, someone you know alert('You are connected'); } else { // no user session available, someone you dont know alert('You are disconnected'); } }); // Replaced with the code below FB.Event.subscribe('auth.authResponseChange', function(response) { if (response.authResponse) { // the user has just logged in alert('You just logged in facebook from somewhere'); } else { // the user has just logged out alert('You just logged out from faceboook'); } }); ***************/ }; // Outside fbAsynch - this WORKS FB.Event.subscribe('auth.authResponseChange', function(response) { if (response.authResponse) { // the user has just logged in // alert('You just logged into Alans facebook from somewhere.'.concat(response.authResponse)); //console.log(response); //alert( 'Listern on '); // This always runs if(response.status=='connected'){ var fbuser= response.authResponse.userID; // because they're connected to us, log em in or auto register them! // var username=''; var name=''; var email=''; FB.api('/me', function(response) { // console.log('Good to see you, ' + response.name ); // console.log(response); name=response.name; email = response.email; username = response.username; //}); //alert( 'User is Connected:'.concat(username)); // }; $.ajax({ type: 'POST', url: '../Users/ajax_login', data: { facebook_id: fbuser, email : email, username: username, name : name, first_name : response.first_name, last_name : response.last_name } }).done(function( msg ) { //alert( 'AJAX sent: ' + msg ); if (msg.substr(0,2)=='OK'){ //alert( 'Logged you in. ' + fbuser ); $('#UserLoginForm').hide(); var welcome_message='Welcome '+ name + '. Redirect to your home page?'; var home=confirm(welcome_message); if (home===true){top.location.href = '../users/home';}; } else { //alert( 'Could not log you in. ' + msg ); }; }); }); }; } else { // the user has just logged out // alert('You just logged out from faceboook'); } }); // logs the user in the application and facebook - doesn't get executed function login(redirection){ alert( 'Clicked login 2'); FB.login(function (response) { if(response.authResponse) { // user is logged in // console.log('Welcome!'); if(redirection != null && redirection != ''){ top.location.href = redirection; } } else { // user could not log in console.log('User cancelled login or did not fully authorize.'); } }, {scope: 'email'}); } // logs the user out of the application and facebook function logout(redirection){ FB.logout(function(response) { // user is logged out // redirection if any if(redirection != null && redirection != ''){ top.location.href = redirection; } }); } // Load the SDK Asynchronously (function(d){ var js, id = 'facebook-jssdk', ref = d.getElementsByTagName('script')[0]; if (d.getElementById(id)) {return;} js = d.createElement('script'); js.id = id; js.async = true; js.src = '//connect.facebook.net/en_US/all.js'; ref.parentNode.insertBefore(js, ref); }(document)); /* (function() { var e = document.createElement('script'); e.async = true; e.src = document.location.protocol + '//connect.facebook.net/en_US/all.js'; document.getElementById('fb-root').appendChild(e); }()); */